Thermoforming facility FRIMO EcoForm 40/55
University of Applied Sciences Upper Austria
Thermoforming is a method of processing semifinished plastic sheets or sheets with the help of...
Recyclingplant EREMA Intarema 1108 TVEplus
JKU - Johannes Kepler University Linz
The patented extruder system INTAREMA® TVEplus® sets new standards in the recycling of materials that...
SML Singlescrew Extruder ES/60/33D
JKU - Johannes Kepler University Linz
Measuring extruder 60/33D (SML)
SML Single Screw Extruder ES/45/28D
JKU - Johannes Kepler University Linz
Experimental extruder with a screw diameter of 45 mm and a process length of 28...
SML Single Screw Extruder ES/35/34D
JKU - Johannes Kepler University Linz
Experimental extruder with a screw diameter of 35 mm and a process length of 34...
Scanning Auger electron spectroscopy
JKU - Johannes Kepler University Linz
Scanning Augerelectronspectroscopy: The SAES system at ZONA (Jamp-9500F von JEOL) allows performing surface analytics on...
Leica SP5 confocal laser Scanning, 2-photon, second harmonic generation (SGH), coherent anti-Stokes Raman scattering (CARS) microscope
University of Graz
Confocal laser scanning, 2-photon, second harmonic generation (SHG), coherent anti-Stokes Raman scattering (CARS) microscope
Material testing device
JKU - Johannes Kepler University Linz
The LTM10 is an electro-dynamic testing machine whose drive is based on linear motor technology...
Coextrusionsglättwerksanlage
JKU - Johannes Kepler University Linz
The co-extrusion film smoothing system has a 7-layer selector plug and a 9-layer feed block....
Deep Learning System EDU
University of Applied Sciences Upper Austria
The Nvidia DGX A100 server provides a Docker-based software platform for computational tasks that can...
SpectraMax® M2e Microplate Reader
JKU - Johannes Kepler University Linz
The Microplate Reader is a laboratory device that detects chemical, biological or physical reactions by...
SHARE
JKU - Johannes Kepler University Linz
SHARE, the Survey of Health, Ageing and Retirement in Europe, is a research infrastructure for...
Organosheet Thermoforming press
University of Applied Sciences Upper Austria
The Langzauner thermoforming press LZT-OK-220-L is used for forming thermoplastic composites (organosheets). This downstroke press...
XPS System
JKU - Johannes Kepler University Linz
X-ray photoelectronspectroscopy system (XPS): The XPS system of ZONA (Nexsa G2 from Thermo Fisher) allows...
CT/Flouresenz/Bildgebung inkl. Narkosegerät
JKU - Johannes Kepler University Linz
Imaging
TGA Q5000 IR - Thermogravimetric Analysis
JKU - Johannes Kepler University Linz
Thermogravimetric Analysis (TGA) measures weight changes in a material as a function of temperature (or...
X-ray diffractometer Bruker D8 Advance
University of Applied Sciences Upper Austria
A XRD unit measures the diffraction phenomenon of X-rays and is used to determine the...
TMA Q400 Thermomechanical Analyzer
JKU - Johannes Kepler University Linz
A thermomechanical analyzer measures sample dimensional changes under conditions of controlled temperature, time, force, and...
Supply Chain Control Tower (Josef Ressel Center for Real-Time Value Network Visibility)
University of Applied Sciences Upper Austria
In the "Josef Ressel Center for Real-Time Value Network Visibility (JRC LIVE)", a generalizable supply...
Raman Spectrometer
TU Wien
This Raman spectrometer offers a time-gating technology that enables the fluorescence background subtraction. The device...
V2X MIMO Testbed for dependable vehicular connectivity
TU Wien
Hardware/Software-Testbed for 4G/5G and IEEE 802.11p for benchmarking dependable connectivity among road users and with...
AI-Cluster
JKU - Johannes Kepler University Linz
Cluster
Agilent RRLC - Rapid Resolution Liquid Chromatography
JKU - Johannes Kepler University Linz
Separation and detection performance for analysis data of the highest quality and reliability.
XPS-Gerät Theta Probe
JKU - Johannes Kepler University Linz
X-ray photoelectronspectroscopy system (XPS): The XPS system of ZONA (Thetaprobe from Thermo Fisher) allows performing...
emission measurement device
JKU - Johannes Kepler University Linz
CO and CO2 emission measurement device for combustion engines
Bähr Dilatometer 805 AD
University of Applied Sciences Upper Austria
The Bähr Dilatometer 805 AD is used for determination of deforming parameters and for creating...
NEC Indoor LED-Wall 220"
University of Applied Sciences Upper Austria
Pixel pitch 1.2mm, incl. video controller, overframe kit (optical cladding), highest quality thanks to metal...
NMR Spectrometer
TU Wien
400 MHz NMR spectrometer; 9.4 T superconducting magnet, probehead 'iProbe BBFO'; sample temperature control (-0...
Nonlinear vector Network Analyzer (NVNA), 67 GHz, 4-Port
TU Wien
Vector network analyzer (VNA) for measurement of S-parameters, 70 GHz in 4-port configuration with second...
DAMAP
TU Wien
DAMAP is an open-source software tool that can be implemented at research institutions to facilitate...
LIT Factory master mold for fibre reinforced thermoplastic composites
JKU - Johannes Kepler University Linz
The master mold is used to accommodate various mold inserts for the production of continuous...
Polytec PSV-400 Scanning Vibrometer
JKU - Johannes Kepler University Linz
The PSV-400 Scanning Vibrometer is a measurement tool for resolving non-contact noise and vibration issues...
Setup for magneto-electrical transport experiments
JKU - Johannes Kepler University Linz
Janis transport system consists of a He4 cooled cryostat and a 7 Tesla superconducting magnet...
Consolidation press
JKU - Johannes Kepler University Linz
The consolidation press is a system for consolidating quasi-two-dimensional structures which are built up with...
iQue3 Screener Flow Cytometer
University of Veterinary Medicine Vienna
The Intellicyt IQue3 is a high through-put flow cytometer with three different lasers (Red -...
Tape Laying Cell
JKU - Johannes Kepler University Linz
In the tape laying cell, quasi-two-dimensional structures are built up from uni-directional fiber-reinforced thermoplastic tapes....
Leica Stellaris 8 STED FALCON
University of Veterinary Medicine Vienna
Inverted confocal laser scanning microscope for stimulated emission depletion (STED), high resolution and fluorescence lifetime...
Data Visualisation Space - Davis
TU Wien
The Data Visualization Space of the TU Wien Bibliothek provides infrastructure for experimenting with and...
Spritzgießmaschine ENGEL VC 80/200
JKU - Johannes Kepler University Linz
Injection molding machine for processing thermoplastic materials. The machines are equipped with a linear robot...
Production Cell for Forming and Back-injection Moulding of thermoplastic composites
JKU - Johannes Kepler University Linz
The production cell consists of an infrared (IR) oven, a 6-axis robot system and an...
reposiTUm
TU Wien
reposiTUm provides direct access to all of TU Wien's open access publications. Apart from documents...
Confocal laser Scanning microscope (Leica Stellaris 5 - Lightning)
TU Wien
Confocal Laser Scanning Microscope (Leica Stellaris 5 - Lightning) - Inverted research microscope DMi8 CS...
Spectroscopic Ellipsometer (FIR, IR, NIR, VIS, UV)
JKU - Johannes Kepler University Linz
Variable angle of incidence spectroscopic elipsometer VASE (NIR-VIS-UV:190-1650nm; IR:300-7500cm-1)
Cloud4Geo
TU Wien
Expansion and extension of the tape libraries in the Arsenal and in the Gußhaus, including...
Diffraktometer Systems, Bruker
University of Vienna
Powder-Diffractometer in Bragg-Brentano geometry in reflection setting. Equipped with a 9-position automatic sample changer, an...
Hallmessplatz
TU Wien
Setup to determine carrier concentration in semiconductors
High Pressure Freezer incl. AFS, Leica
University of Vienna
Rapid cryo-immobilisation of samples up to 300 µm resulting in vitrified probes followed by accelerated...
confocal Laserscanning microscope TCS SP8, Leica Microsystems
University of Vienna
Confocal Laserscanning Microscope with a 6-line Ar-Laser equipped with 3 PMTs (plus T-PMT ) and...
UV microscope (ZEISS)
University of Vienna
Using UV light nearly doubles the achievable resolution of the microscope. The UV sensitive camera...
Transmission electron microscope Libra 120 (ZEISS)
University of Vienna
High-resolution transmission electron microscope for biological samples (research and service).
SPOT Boston Dynamics mobile robot
TU Wien
Boston Dynamics SPOT robotic platform "Explorer-Package"; 2 batteries plus charger; JXD Tablet Controller; Laserscanner Riegl...
Double climate test chamber - TU Wien
TU Wien
Climatic test chamber with 2 chambers for climate and environmental simulation and differential climate stress....
confocal Laserscanning microscope SP5
University of Vienna
Confocal Laserscanning Microscope
Scanning electron microscope, JEOL IT300 LaB6
University of Vienna
Scanning Electron Microscope including secondary and backscatter electron detectors as well as elemental analysis /mapping...
GEOCLIM Server
TU Wien
This Server infrastructure serves for connecting the EODC disk storage to the tape libraries, the...
FAIR2Earth Storage System
TU Wien
This multi Petabyte disk serves as an extension of the storage component of the core...
EODC Earth Observation Data Centre
TU Wien
Within the framework of the European Copernicus programme, a series of Sentinel satellites have been...
X-ray powder diffractometer (Arwen)
TU Wien
The instrument works in vertical Theta/Theta geometry, both in reflection and transmission mode, respectively. It...
Bio Reactors
TU Wien
Bioreactorsystem with 4 2L vessels equipped with process management system, offgas analysis and 4 pumps.
Realtime oscilloscope Agilent Infiniium oscilloscope DSO91204B
TU Wien
Infiniium Oscilloscope, 12 GHz realtime bandwidth, digital, 40 GS/s, 4 channels
GNSS Signal Simulator
TU Wien
GNSS (Global Navigation Satellite Systems) signal generator for the simulation of multi-frequency GPS and Galileo...
Loudspeaker array
Austrian Academy of Sciences (ÖAW)
Audio: 91 individually driven loudspeakers; four additional subwoofer channels; 96 audio channels in total. Geometry:...
Semi-anechoic sound chamber
Austrian Academy of Sciences (ÖAW)
Acoustic semi-anechoic sound chamber. With the size of 6 x 6 x 3 m, it...
Q Exactive Standard Mass Spectrometer, Mass Spectrometry and Proteomics CeMM
Austrian Academy of Sciences (ÖAW)
The CeMM Research Center for Molecular Medicine of the Austrian Academy of Sciences offers a...
Illumina NovaSeq 6000 Sequencing System
Austrian Academy of Sciences (ÖAW)
The Illumina NovaSeq 6000 provides ultrahigh-throughput sequencing for large sequencing projects. For genomic research it...
BBMRI.at – Österreichische Biobanken Forschungsinfrastruktur
BBMRI.at - Biobanking and BioMolecular resources Research Infrastructure Austria
BBMRI.at supports biomedical research and facilitates access to human and animal samples and collaborations. To...
Fluorescence microscope BZ-X800
University of Innsbruck
BZ-X800 Fluorescence microscope (Keyence) • All-in-one fluorescence microscope • Low-photobleaching mode • Motorised XY stage...
Fieldemission Scanning electron microscope
AIT Austrian Institute of Technology GmbH
The field emission scanning electron microscope can be used to analyze the microstructure of light...
PECUNIA PROM-MH Compendium
Medical University of Vienna
The PECUNIA PROM-MH Compendium is an electronic library of generic patient-reported outcome measures (PROMs) used...
PECUNIA Reference Unit Cost (RUC) Compendium
Medical University of Vienna
The PECUNIA Reference Unit Costs Compendium (PECUNIA RUC Compendium) is a Microsoft Excel®-based multi-sectoral, multi-country...
DHE Unit Cost Online Database
Medical University of Vienna
The DHE Unit Cost Online Database was launched in 2016 to support the feasibility of...
Physical Forming Simulator GLEEBLE
TU Wien
System for physical simulations of thermomechanical processes on metals
Wire-based Additive Manufacturing Laboratory
AIT Austrian Institute of Technology GmbH
In the Wire-based Additive Manufacturing Laboratory, AIT experts develop design methods for light metal components...
Drive Laboratories
AIT Austrian Institute of Technology GmbH
The AIT Drive Laboratory offers long standing expertise and excellent research and validation infrastructure to...
Battery Materials Laboratory
AIT Austrian Institute of Technology GmbH
Specially equipped facilities for the synthesis, analysis and validation of material in small-sized cells open...
low-Pressure die casting machine Kurtz AK92
AIT Austrian Institute of Technology GmbH
The Kurtz AK92 low-pressure casting plant (ND) is a fully automated, semi-industrial experimental facility for...
Metallography
AIT Austrian Institute of Technology GmbH
The extensive laboratory infrastructure enables our experts to analyse materials and their respective process histories...
Environmental testing Laboratory
AIT Austrian Institute of Technology GmbH
Experienced experts of our team are active in both Austrian and international standards boards, forming...
Material testing and Characterisation
AIT Austrian Institute of Technology GmbH
Modern high-performance materials are opening up new, increasingly demanding fields of application. This requires a...
Vertical continuous casting plant
AIT Austrian Institute of Technology GmbH
LKR offers a semi-industrial and experimental direct chill casting machine for vertical continuous casting of...
Mechanical Materials testing
AIT Austrian Institute of Technology GmbH
The classic tensile test provides essential information on stiffness and resilience of materials. LKR testers...
Fatigue testing
AIT Austrian Institute of Technology GmbH
LKR is certified to perform accredited load controlled fatigue testing according to DIN 50100 for...
Cold chamber die casting machine DAK1100-112
AIT Austrian Institute of Technology GmbH
The LKR cold chamber die casting machine is a fully automated industrial-scale test facility for...
Vacuum Pressure casting machine
AIT Austrian Institute of Technology GmbH
LKR offers a semi-industrial and experimental vacuum die casting plant for aluminium and magnesium as...
Battery test Laboratory
AIT Austrian Institute of Technology GmbH
AIT researchers at the Battery Test Laboratory are specialists in both performance validation and safety...
DSC – Differential Thermal Analysis
AIT Austrian Institute of Technology GmbH
Our team of experienced scientists uses differential calorimetry to determine both the formation and solution...
Heat treatments Laboratory
AIT Austrian Institute of Technology GmbH
LKR provides laboratory infrastructure for adjusting strength parameters of alloys, optimizing heat treatments and achieving...
Cell Production
AIT Austrian Institute of Technology GmbH
A dry room with a state-of-the-art research pilot line for pouch cell manufacturing (up to...
casting Lab
AIT Austrian Institute of Technology GmbH
In addition to the industrial-scale casting plants, the LKR Casting Lab also includes furnaces, equipment...
Forming Technology Laboratory
AIT Austrian Institute of Technology GmbH
The Forming Technology Laboratory provides state-of-the-art infrastructure for experimental development, alloy optimization, as well as...
ITC-press (Interlaken ServoPress 225 - SP225)
AIT Austrian Institute of Technology GmbH
The state-of-the-art forming equipment available at LKR includes a double acting hydraulic press for material...
Horizontal continuous casting plant
AIT Austrian Institute of Technology GmbH
LKR offers a semi-industrial direct chill casting machine for horizontal continuous casting of aluminium alloys...
250 t press (SDZP 250 1200 X 900)
AIT Austrian Institute of Technology GmbH
Servo-hydraulic double-column drawing press with active drawing cushion
Extrusion plant
AIT Austrian Institute of Technology GmbH
LKR offers state-of-the art extrusion equipment for carrying out feasibility studies for new light metal...
X-ray Fluorescence Analysis (XRF)
AIT Austrian Institute of Technology GmbH
X-ray fluorescence is used to perform elemental analysis on samples in a non-invasive way. The...
Tribometer
Aerospace & Advanced Composits GmbH
AAC runs a vacuum tribometer, which enables the investigation of materials and coatings with respect...
Ball bearing test rig
Aerospace & Advanced Composits GmbH
Ball bearings can be tested in a wide range of parameters and environments at AAC....
Slipring test chamber
Aerospace & Advanced Composits GmbH
One ring with up to 4 brushes can be tested from ambient environment, gaseous environment...
Cryo-Tribometer
Aerospace & Advanced Composits GmbH
The Cryo-Tribometer enables to derive friction and wear from cryogenic temperatures up to room temperature....
Gear- and Drive Unit test chamber
Aerospace & Advanced Composits GmbH
The test facility consists of an input engine which is used for movement (constant speed,...
Karte wird geladen...